******************************************************************************************

Release Notes for Vigor2800 series

Firmware Version : 2.6.4.1
Release Date : May 23, 2006

Applied Models : Vigor2800, Vigor2800G, Vigor2800i, Vigor2800Gi, Vigor2800V, Vigor2800VG

******************************************************************************************

[Release Firmware]

(1)For Annex A Model
  - standard ADSL
    1> "v28vy2641.xxx" is used for modem code Y.1.28.187.
       (Recommended for Australia or ADSL)

  - standard ADSL/ADSL2/ADSL2+
    1> "v28vi2641.xxx" is used for modem code D.16.2.1. 
       (Recommended for Italy, Belgium and Sweden)

    2> "v28va2641.xxx" is used for modem code D.57.2.14. (Standard)

    3> "v28vf2641.xxx" is used for modem code D.79.42.14. 
       (Recommended for Finland)

    4> "v28ve2641.xxx" is used for modem code E.38.2.23. 
       (Recommended for the UK and the Netherlands)

    5> "v28vg2641.xxx" is used for modem code E.67.2.12.
       (Try this one, if met dsl sync issue) 

(2)For Annex B Model
  - standard ADSL
    1> "v28vz2641.xxx" is used for modem code A.27.4.14.
       (Recommended for ADSL)

  - standard ADSL/ADSL2/ADSL2+
    1> "v28vb2641.xxx" is used for modem code E.11.2.19. (Standard)

    2> "v28vm2641.xxx" is used for modem code E.74.2.3. 
       (Try this one, if met dsl sync issue) 
  
    3> "v28vd2641.xxx" is used for modem code E.74.2.11. 
       (Try this one, if met dsl sync issue) 


[Improvements & Corrected Problems] 

- Correct an issue that router cannot get a static WAN IP from Arrakis' (British Telcom)
  BBRAS via PPPoA protocol even they have choose a fixed IP to the PPPoA session of WAN
  port.

- Correct an issue when you enable the 'Restrict Web Feature' and check only the
  'Executable' files. This prevents users on the LAN from downloading email attachments
  from Hotmail (including simple JPEG pictures).

- Add static routes for setting subnet for management when use VPN default route as the
  internet access backbone.

- Improve VoIP pass through for non-VoIP model.

- Improve X.509 for second Identity profile.

- Correct a reboot issue due to DPD log appeared while executing Telnet command "log -wt".

- Improve ISDN backup function.

- Improve FTP remote firmware upgrade. 

- Correct a PPPoE compatiable issue with Huawei IP DSLAM.

- Improve DDNS for ChangeIP DDNS provider.

- Added two Telnet commands "wan ppp_mru" and "wan ppp_ipcp_vso" to adjust the size 
  of PPP LCP MRU and enable/disable PPP IPCP VSO (Vendor Specific Option). 

- Correct an issue that you can login to the Vigor via 2nd IP even though the 
  "Allow management from the Internet" is disabled. 

- Correct an issue that open port function fails when WAN connection drops and reconnects
  again.

- Improve firewall function to prevent attack of MSBlast.

- Change default setting of ADSL's modulation from Multimode to G.DMT on UK version.




******************************************************************************************

Release Notes for Vigor2800 series

Firmware Version : 2.6.4

Release Date : March 17, 2006

Applied Models : Vigor2800, Vigor2800G, Vigor2800i, Vigor2800Gi, Vigor2800V, Vigor2800VG

******************************************************************************************

[Release Firmware]

(1)For Annex A Model
  - standard ADSL
    1> "v28vy264.xxx" is used for modem code Y.1.28.187.
       (Recommended for Australia or ADSL)

  - standard ADSL/ADSL2/ADSL2+
    1> "v28vi264.xxx" is used for modem code D.16.2.1. 
       (Recommended for Italy, Belgium and Sweden)

    2> "v28va264.xxx" is used for modem code D.57.2.14. (Standard)

    3> "v28vf264.xxx" is used for modem code D.79.42.14. 
       (Recommended for Finland)

    4> "v28ve264.xxx" is used for modem code E.38.2.23. 
       (Recommended for UK)

    5> "v28vg264.xxx" is used for modem code E.67.2.12.
       (Try this one, if met dsl sync issue) 

(2)For Annex B Model
  - standard ADSL
    1> "v28vz264.xxx" is used for modem code A.27.4.14.
       (Recommended for ADSL)

  - standard ADSL/ADSL2/ADSL2+
    1> "v28vb264.xxx" is used for modem code E.11.2.19. (Standard)

    2> "v28vm264.xxx" is used for modem code E.74.2.3. 
       (Try this one, if met dsl sync issue) 


[Improvements & Corrected Problems] 

ADSL
- Release new ADSL/2/2+ modem code E.67.2.12 for Annex A and E.74.2.1 for Annex B. 

Wireless
- Improve WDS (Wireless Distribution System).

ISDN
- Support ISDN for Vigor2800i/2800Gi

VPN, IPSec
- Support IPSec Multiple SA (Destination Oriented).
  Support multiple concurrent IPsec tunnels with a single IPsec peer.
  This single IPsec peer can have more than 1 network domain on LAN side and can
  negotiate different SAs for each network domain.

Misc
- Add SNTP daylight saving function.
- Improve the interoperability for the MPoA DHCP client.
- Correct a booting issue after upgrading v2.6.3.1 from former version.
- Support CFG ID to prevent restoring wrong configuration file.

[End of File]