****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.3.1 Release Date : Sep 25, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L),Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_2631.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_2631.xxx" is used for modem code 113111. 3> "v2k7v_a2_2631.xxx" is used for modem code 131701.(Recommanded for UK) 4> "v2k7v_a3_2631.xxx" is used for modem code 1401201.(Recommanded for USA or for G.lite environment) (2)For Annex B Model, 1> "v2k7v_b2_2631.xxx" is used for modem code 1211202. 2> "v2k7v_b1_2631.xxx" is used for modem code 113112. 3> "v2k7v_b_2631.xxx" is used for modem code 131812. (Standard) 4> "v2k7v_b3_2631.xxx" is used for modem code 1311302.(Recommanded for Germany) [Improvements & Corrected Problems] - Correct the issue that wireless client can't find AP after configuring WDS. - Correct 'adsl ppp' command issue that modulation (modu) can't be set more than four. - Improve ADSL retrain issue. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.3 Release Date : Sep 8, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L),Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_263.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_263.xxx" is used for modem code 113111. 3> "v2k7v_a2_263.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_263.xxx" is used for modem code 1401201. (2)For Annex B Model, 1> "v2k7v_b2_263.xxx" is used for modem code 1211202. 2> "v2k7v_b1_263.xxx" is used for modem code 113112. 3> "v2k7v_b_263.xxx" is used for modem code 131812. (Standard) 4> "v2k7v_b3_263.xxx" is used for modem code 1311302. (Recommanded for Germany) [New Functions] - Add True IP DMZ function. - Support Annex M (modem code MUST be 121201 or later). - Support G.lite (for modem code 1401201 only). - Support Packet-OVERDRIVE(tm) on wireless connection. It can increase wireless performance if the wireless client also supports such technology. - The Web Content Filter (SurfControl) is supported when VPN is the default route. - Add two new adsl Telnet commands. a. "adsl showbins" to show dsl bits per bin(tone) information. b. "adsl optn dual on/off" to enable/disable dual-lantency (modem code MUST be 131701 or later). - Add more wireless messages on syslog. - Add DSL Annex Info on WUI. [Improvements & Corrected Problems] - Allow dynamic ip client to dial-in without default dial-in preshared key if certificate is used. - Improve the Wireless 802.1X interoperability with FreeRADIUS server. - Improve the PPPoE interoperability. - Correct the QoS/Firewall LED display issue. - Improve the DDNS stability. - Correct display of "path mode" and "dslam vendor information" on Telnet command "adsl status". - Improve the VPN stability on PPTP and IPSEC. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.2.1 Release Date : July 31, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L),Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_2621.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_2621.xxx" is used for modem code 113111. 3> "v2k7v_a2_2621.xxx" is used for modem code 131701. (Recommanded for UK) 4> "v2k7v_a3_2621.xxx" is used for modem code 1401201. (2)For Annex B Model, 1> "v2k7v_b_2621.xxx" is used for modem code 1211202. 2> "v2k7v_b1_2621.xxx" is used for modem code 113112. 3> "v2k7v_b2_2621.xxx" is used for modem code 131812. (Standard) 4> "v2k7v_b3_2621.xxx" is used for modem code 1311302.(Recommanded for Germany) [New Functions] - True IP DMZ function. - Add telnet command for Broadsoft SIP proxy call control mode. - Add protection for "Configuration Backup / Restoration" to prevent loading wrong configuration. [Improvements & Corrected Problems] - Improve interoperability for SIP server authentication. - Correct the problem of set default limit value but causing reset current session count. - Correct the problem that ring pattern cannot work properly for SIP account after index three. - Correct the issue that answering port (FXS1 or FXS2) cannot connect to transferring call while receiving it for both ring ports (FXS1 and 2) are activated. - Correct the issue that firewall setting is unable to be restored when use "Configuration Backup / Restoration". - Correct the issue that enabling hot-line function with empty SIP URL. Note: 1. To turn on/off broadsoft call control mode, use the following telnet command: > voip sip acc n -B val // where n means 1~6 SIP account; val means 0/1 representing turn off/on. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.2 Release Date : June 20, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L),Vigor2700Gi(Annex B), Vigor2700VGi(Annex B) ****************************************************************************************** [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_262.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_262.xxx" is used for modem code 113111. 3> "v2k7v_a2_262.xxx" is used for modem code 131701.(Recommanded for the UK) (2)For Annex B Model, 1> "v2k7v_b_262.xxx" is used for modem code 1211202. 2> "v2k7v_b1_262.xxx" is used for modem code 113112. 3> "v2k7v_b2_262.xxx" is used for modem code 131812. (Standard) 4> "v2k7v_b3_262.xxx" is used for modem code 1311302.(Recommanded for Germany) [New Functions] - Support ISDN function on Vigor2700Gi and Vigor2700VGi. - Add Bandwidth Management (limit session and limit bandwidth). - Add Wake on LAN, Ping Diagnosis and Trace Route functions. - Add Data Flow Monitor function. - Release new ADSL/2/2+ modem code 131701 for Annex A and 131812 for Annex B. [Improvements & Corrected Problems] - Add switch settings for syslog message. - Add authentication setting for Mail Alert. - Added two Telnet commands "wan ppp_mru" and "wan ppp_ipcp_vso" to adjust the size of PPP LCP MRU and enable/disable PPP IPCP VSO (Vendor Specific Option). - Correct daylight saving for "Vladivostok" setting. - Correct an issue that DPD doesn't work on dial-in side. - Correct an issue that wireless function can not be re-enabled. - Correct an issue that Open Port function fails when WAN connection drops and reconnects again. - Correct an issue that you can login to the Vigor via 2nd IP even though the "Allow management from the Internet" is disabled. - Correct vpi/vci=0 issue when download RST firmware. - Correct a reboot issue due to DPD log appeared while executing Telnet command "log -wt". - Correct an issue that router cannot get a static WAN IP from Arrakis' (British Telcom) BBRAS via PPPoA protocol even they have choose a fixed IP to the PPPoA session of WAN port. - Improve the Telnet commands "mngt noping" and "mngt defenseworm". - Improve DDNS for ChangeIP DDNS provider. - Improve the note description on VPN Remote Access Control page. - Improve the RFC-2543 interoperability. - Move the 'PSTN Setup' setting into the Dial Plan page on 2S1L model. ****************************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.6.1 Release Date : April 10, 2006 Applied Models : Vigor2700, Vigor2700G,Vigor2700V(2S/2S1L), Vigor2700VG(2S/2S1L) ****************************************************************************************** [Introduction] The Vigor2700 series are compliance of ADSL (T1.413 issue 2, ITU G.922.1 (G.dmt)), ADSL2 (ITU G.992.3 (G.dmt.bis)) and ADSL2+ (ITU G.992.5). The maximum bandwidth is up to 24Mbps for downstream and 1Mbps for upstream. The compliance of ADSL2/2+ makes Vigor2700 series a great improvement on both loop reach and bandwidth. The Vigor2700 series provides all-in-one function for four-port Ethernet Switch, 802.11-based wireless connectivity (G model) is available for customer's alternative. The all-in-one design makes network management simply and easily. The rich VPN and firewall features protect the against versatile Internet malicious attacks. The Vigor2700 series provides 2 VPN tunnels with AES, MPPE and DES/3DES encryption. The IKE authentication is more flexible for choosing digital signature (X.509) or pre-shared key. The firewall contains SPI, IP/MAC address filtering, IM/P2P blocking, DoS/DDoS protection and Web/URL content filtering. For more details of the product information, please visit our website on http://www.draytek.com/. [Release Firmware] (1)For Annex A Model, 1> "v2k7v_a_261.xxx" is used for modem code 121201. (Standard) 2> "v2k7v_a1_261.xxx" is used for modem code 113111. 3> "v2k7v_a2_261.xxx" is used for modem code 131701. (2)For Annex B Model, 1> "v2k7v_b_261.xxx" is used for modem code 1211202. (Standard) 2> "v2k7v_b1_261.xxx" is used for modem code 113112. 3> "v2k7v_b2_261.xxx" is used for modem code 131812. [End Of File]