*************************************************************************
    
    The Release Notes for Vigor2600Ge

    Firmware Version    : 2.5.8
    Release Date        : Dec 29, 2005

    Applied Models      : Vigor2600Ge    
**************************************************************************
* For Annex A Model 
*  [Standard] 
*	"v26ea258.xxx", Modem:42E2EA53
*
*  [UK] 
*    	"v26ek258.xxx", Modem:41E2BE2C
*	[Recommended for UK, 2.5.8_UK]
*
*  [UK2] 
*    	"v26e0258.xxx", Modem:43E2EAA1 
*	[Recommended for high dB users which are using ADSL extended line on UK, 2.5.8_UK2]
*	
*  [Netherlands] 
*    	"v26ec258.xxx", Modem:40E2BE29
*	[Recommended for Netherland, 2.5.8_H]
*
*  [AnnexA_1] 
*    	"v26ei258.xxx", Modem:43E2EAD4
*	[Recommended for Italy and Taiwan High Rate ADSL line, 2.5.8_I]
*
*  [for_G.Lite_only] 
*    	"v26ex258.xxx", Modem:43E2EA9F
*	[Recommended for G.Lite only, 2.5.8_X]
*
*  [AnnexA_2] 
*    	"v26en258.xxx", Modem:44E2EA17
*	[try this one if meet dsl sync issue, new modem code, 2.5.8_N]  
*  
* For Annex B Model--------------------------------------------------------
*  [Standard] 
*    	"v26eb258.xxx", Modem:40E3BE15
*
*
*  [AnnexB_3] 
*    	"v26eg258.xxx", Modem:40E4BE96
*	
*
*  [AnnexB_1] 
*    	"v26ez258.xxx", Modem:40E4BEA9
*	[Recommanded for Czech,Greece,Slovakia, 2.5.8_Z]
*
*  [AnnexB_2] 
*    	"v26ey258.xxx", Modem:41e4ea0b
*	[Recommended for Germany, Portugal, 2.5.8_Y]
***************************************************************************     
Please ensure you download and use the latest router tools when
upgrading the firmware. 

[Supported Models]

	1. Vigor 2600Ge.

[Corrected Problems]
	1. fix 2nd subnet loopback issue
	2. Fix double release buffer in ip_defrg.c(IPFilter check Accept incoming UDP packets)
	3. Fix WAN as PPPoE can't send UDP Fragment
	4. Add TearDrop/Bonk attack check in IP.C
	5. add 2nd subnet support IP unnumbering
	6. The packets from Static Route subnets will be NATed.
	7. Correct MSN Messenger hang-up problem when UPnP is enabled.
        8. Correct DHCP IP conflict problem.
        9. Correct NAT Loopback problem.
        10. Improve Wireless interoperability with Intel Centrino platform.
        11. Increase NAT sessions to 5000.
        12. Correct UDP fragment packets translating problem in PPPoE connection.
        13. Enhance the stability of eMule. 


      
[Hint]

1. How to find the Wireless Hardware Version:
   In the "Wireless LAN Setup" > "Wireless Information" > "Firmware Version", the last
   digit is the Wireless Hardware Version. For example, v1.2.8.16.04.2 means the
   wireless hardware version is 2.

2. If you have any ADSL on-line problem, please contact your service provide at first, 
   or get into web user interface ("Internet Access Setup" > "PPPoE/PPPoA" or "MPoA") to change 
   the "Modulation" of "DSL Modem Settings" to "T1.413", then to try again.  Also, you can use 
   the following Telnet commands to tune your router working with Globespan chipset DSLAM :

  > adsl status            Get DSLAM chipset verdor information
  > adsl dslam gspn        Set ADSL parameters compatible with the Globespan chipset DSLAM 
  > adsl dslam default     Set ADSL parameters to fatory default settings  

[END oF FILE]